PRODUCTS CATEGORIES
 
 
 
Flocculator  /   Jar Test ApparatusCI -189
 

This is with variable speed from 20 R.P.M. to 100 R.P.M. approx. Fluorescent tubes mounted below translucent plastic plate to provide diffused cold light to flocculation samples. The gear chain for multiple spindle drive gives same speed for all the Stainless steel stirring paddle approx. 1” x 3” are attached to the rod having 10” long approx, with lighting knob at top permit adjustment of paddle height spacing of approx 6” in between rods permits use to 1000 ml beaker which rest directly on bench.

 
Model
Capacity
JTA-01
2 Jar Test Apparatus
JTA-02
3 Jar Test Apparatus
JTA-03
4 Jar Test Apparatus
JTA-04
5 Jar Test Apparatus
JTA-05
6 Jar Test Apparatus
 
Optional :
1. Mechanical Automatic Timer
2. Digital Automatic Timer
3. Digital RPM meter indicator
 
Ampoule  Filling  & Sealing DeviceCI -259
 

Simple  syringe type hand driven gives ten ampoules per minute capacity to fill adjustable from 1 ml  to 10 ml by a cam  leaver arrangement automatic intake outflow of fluid all contact  parts are Borosil glass the sealing apparatus consists of glass fusing burner for LPG or petroleum gas with foot bellow and rubber tubing.

 
Model
Capacity
AFSD-01
10 Ampoules /-Minute
 
Ampoule Washing MachineCI -260
 

Ampoule Washing  consists of  6 S.S  needle  jets  fixed  on  a  stainless  steel  pipe  12.5 mm dia with side tap and serrations  for fixing  rubber tube with tab water spring loaded ampoule holding arrangement for various sizes of ampoules with stainless steel bottom tray on stand.

 
Model
AWM-01
 
Antibiotic Zone ReaderCI -261
 

This zone  reader  measures  the  diameter of  the inhibited zone to 0.02mm. With the range of 0 to 35 mm. Work on 230 volts AC 50 C/S.

 
Model
Type
AZR-01
S.S. Body motorized deluxe quality
 
Analgesia MeterCI -262
Model
Type
AGM-01
Tail Flick Radiant heat type or tail flick type for determining analgesic effect of drugs
AGM-02
Eddy’s Hot plate type for determining analgesic effect of drugs
 
Aseptic CabinetCI -263
 

With sloping front. Acrylic  sheet  front  and  side  doors ( full visible transparent ) 3” germicidal  ultraviolet  tube  and  2”  fluorescent tube for white light with necessary choke blast, starter and switches fitted. Also main lead and plug provided. Two  holes with rings and sieves for insertion of arms provided.

 
Model
Size in mm
ASC-01
950 x 500 x 500 
 
Bottle Filling MachineCI -264
 

Semi Automatic electric operated instrument. Capacity 50 ml to 300 ml Complete Stainless steel body.

 
Model
Hand Operated
Automatic Single Syringe SS Cover
BFM-01
 
 
Bottle Vacuum Filling MachineCI -265
 

This unit has two filling heads, suitable for filling all sizes and types of bottles to predetermined level. Suitable for all types of liquids to a predetermined level in glass, rigid HPDE3 & Aluminums bottles with narrow necks. The machine is designed to accommodate ketchup, hot syrups & is fitted over SS tank. Completely made of stainless steel 304 grade.

 
Model
Capacity
With Compressor
With Vacuum Pump
BVF-01
10/15 Bottle
 
 
Bottle Washing MachineCI -266
 
Model
Tank size in inches
Type
BWM-01
18”x12”x6”
Single Brush
BWM-02
24”x18”x8”
Double Brush
BWM-03
20”x30”x18”
S S TANK
 
Bottle Cap Selling MachineCI -267
 
Model
BCS-01
 
Bulk DensityCI -268
 
Model
With Digital Timer
With  Digital Timer & Counter
BDY-01
 
 
Capsule Filling MachineCI -269
 

A versatile lever operated semi automatic machine for various operations with lever order of  Plates for putting of capsules by hand. Removal  of  caps. Filling of powder by dispensing of brush pressing. Fixing of  caps  and sealing. Injection of capsules contact parts of stainless for 100 capsules of size 0.

 
Model
Capacity
Size
CFM-01
100 Capsules
0.2 or 0.5
 
Collapsible Tube Filling / Sealing MachineCI -270
 

Stroke  type  barrel  and  piston arrangement  with  stroke  setting  for  various capacities  of  filling  tubes detachable  nozzles provided for each separate capacity. All contact parts are of stainless steel including hopper built on cast iron body.

 
Model
Type
specification
CTF-01
Filling
CTF-02
Sealing machine   
Hand lever sliding movement with toothed  jaw spring action release of jaws robust construction .
 
DisintegratorCI -271
 

With hammers fixed to a disc of dia 1.5" thick through which passes a shaft being revolved at 3000 RPM. The hammers are enclosed in a drum, the sides and Supper surface of which are roughened. The inner surface is undulant. The lower part of drum is  made  of  chrome  plated  brass  and is detachable so  that  different  mesh  screens ( Sieves ) coarse,  Medium or fine supplied with the equipment can be easily placed.

 
Model
DG-01
 
Willy MillCI -271
 
With hammers fixed to a disc of dia 1.5" thick through which passes a shaft being revolved at 3000 RPM. The hammers are enclosed in a drum, the sides and Supper surface of which are roughened. The inner surface is undulant. The lower part of drum is  made  of  chrome  plated  brass  and is detachable so  that  different  mesh  screens ( Sieves ) coarse,  Medium or fine supplied with the equipment can be easily placed.
 
Model
DG-01
 
Sterility Test ApparatusCI -272
 

This unit is made of S. Steel (304). A 47 mm membrane filter is installed in a suitable holder. After filtration is completed, sterile flushing fluid is passed into the funnels, rinsing all sample residues through the filters so that is cannot possibly inhibit growth of the retained micro-organisms. If growth is not visible after the incubations period, the sample passes the text.

 
Model
Filter dia in mm
Manifold
Holding capacity
SRT-01
47 mm
Unit of 3 test
250 ml
SRT-02
47 mm
Unit of 6 test
250 ml
 
Tablet Coating PanCI -273
 

This pan is 12” dia  stainless steel  the  machine is worked  by oil immersed gear box with  F.H.P. motor drive air blower is operated independently and air is thermostatically controlled to give temp. 30°C to 110°C switches  for  motor blower  heater and thermostat are fixed on a panel with neon indicator. Also main lead 15 Amp plug provided.

 
Model
with Gear Motor
with ½ hp Motor and Gear Box
TCP-01
 
 
Tablet Making MachineCI -274
 

Single  punch  for  making  tablets  up to 1000 mg  and  as  per  size  of  dia  and  punch 6, 9, 12  mm  automatic  compression  and ejection device with each revolution of the wheel drive automatic feed and removal of tablets built on heavy cast body with eccentric  pressure  system. Easy  setting  for  thickness  and   hardness  of  tablets  with  nuts  and  lock  nuts. Set  of two spanners provided necessary tool.

 
Model
Punch Size in mm
Hand operated
Motorized Electrically operated
TMM-01
6 / 9 / 12 mm
   
 
Tablet Dissolution Rate Test ApparatusCI -275
 

Dissolution rate consists of water bath of 30.5 cm long 20.5 cm wide  and 23 cm high fitted with a thermostatic  control  maintains the temperature of water at 47°C with + 0.5 variation covered vessel 100 ml made of corning glass variable Speed motor cylinder basket and shaft with blades of stainless steel.

 
Model
Type
With Digital r.p.m or temp. meter
With Digital Temp &  r.p.m meter
Six Test With Digital Timer Temp & r.p.m  meter
TDRT-01
Single drum test
   
 
Tablet FriabilityCI -276
 

Used for tablets to determine the durability form time of production to the time of use, a transparent plastic drum rotating has plastic blade which carries the period is determined by a timber tablets are weighed before and after the test and difference in weight for a particular time period indicates the rate of abrasion.

 
Model
Type
With Digital timer
With Digital r.p.m
With Digital Timer & r.p.m
TF-01
Single Drum
   
Tf-02
Double Drum
   
 
Tablet DisintegrationCI -277
 

Used  for  determination  of time of  tablets, a  motorized  shaft  moves in up and down direction at  a  frequency of 30 cycles per minute holds 6 glass tubes of standard size with stainless steel wire gauge bottom cylinder moves up and down with dish inside in a liter beaker filled of distilled water which is maintained at 37°C by thermostatically controlled hot plates.

 
Model
Type
TDG-01
Single Test apparatus
TDG-02
Single test apparatus with digital temp
TDG-03
Double Test apparatus
TDG-04
Double Test Apparatus with digital Temp. &.  R.P.M
 
Tablet Polishing PanCI -278
 

Detachable polishing pan for use with coating pan is made of mild steel painted and provided with inner lining of superior canvas cloth inner dia 12” and 8” high with opening of  7” dia neck.

 
Model
Inner dia in inches
Height in inches
TPP-01
12”
8”
 
Tablet Hardness TesterCI -279
 
Model
Type
TH-01
Monsanto
TH-02
Pfizer
 
Swimming Test Apparatus Single ChamberCI -280
 

Having 25 cm diameter clear Perspex rotating drum with ribs, in a clear Perspex tank and a resettable  mechanical counter.

 
Model
STA-01
 
Rota RodCI -281
 

This is latest with digital counter. or determining neuro pixicity muscle tone balance and motor co-ordination in rats and mice consisting of two, three or four compartments of 150 mm width each with a rotating rod of 25 mm dia. Having speeds 5, 10, 15, 20 and 25 RPM with time interval countries in each compartment.

 
Model
RR-01
RR-02
RR-03
RR-04
RR-05
TYPE
One Compartment
Two Compartment
Three Compartment
Four Compartment
Five Compartment
 
Respiration PumpCI -282
 

This apparatus has single cylinder pump with mechanically operated valve. All metal construction. The driving cone has 3 slots & balance A 0.25 H.P. geared Crompton motor drives the pump. The stroke is adjustable & graduated in cc. up to 500cc. Motor coupled. On castor wheel base.

 
Model
dia in inches
RP-01
6” x 9” x 12” dia
 
Organ Bath StudentCI -283
 
Model
Type
SOB-01
Single unit
SOB-02
Double unit
SOB-03
Single unit with digital temp. & stirrer
SOB-04
Double unit with digital temp & stirrer
 
Spirometer StudentCI -284
 

With chain compensates counter balance to flat through pulley calibrated to denote volume inlet & outlet tubes stainless  steel chamber with corrugated rubber and mouth piece.

 
Model
Capacity
SS-01
6 ltrs
 
PerimeterCI -285
 

Automatically records field to 90 degree in all meridians. A set of interchangeable and permanent washable test objects is included with the instrument. The objects subtend angles of 4 degree, 1 degree, ½ degree, ¼ degree and are in white, green, and red blue object in the last three sizes are also included. With transformer to work on 220V mains with 100 charts.

 
Model
PR-01
 
Hand Grip DynameterCI -286
 

This unit is for isometric exercise. It consists of two parallel metallic hollow bars, called the handles. These are connected together through a flexible elliptical metallic strip. The whole apparatus can conveniently be held within the palm. This hand dynamometer measures grip strength up to 50 Kg. Graduations. A graduated pressure scale is also provided between the bars.

 
Model
HGD-01
 
Operation Table For AnimalCI -287
 

With all steel frame designed for greater stability, stainless steel top 127x45cm. In  two salves sloping towards their central drain, warming chamber, casters, moving handless with animal holder & stainless steel tray and two movable uprights.

 
Model
Size
specification
OT-01
Big
OT-02
Small table    
For rabbits, rats, guinea pig etc, stainless steel top adjustable head holder, trying cleats, cut back at the head end with warming chambers.
 
Ampoule ClarityCI -288
 

Milky white and black screen fitted on a base board with diffused light arrangement overall dimension are 23”×15”×18” high. A stainless upright with adjustable slide arm with clamp magnifier, main cord and plug.

 
Mammalian Heart Perfusion AssemblyCI -289
 

Transparent Perspex bath is 12”x9”x8” and rests on a metal stand: a 1”x3/8” thick edge  at  the  top  makes clamps etc. Thermostatic controlled sensitivity + 2°C. With Stirrer & Two pilot lamps indicate the thermostat and stirrer operation.

 
Model
MH-01
 
TelethermometerCI -290
 
Model
Type
TEL-01
Single probe
TEL-02
Six probe
 
Actophoto Meter CI -291
 

This apparatus is  designed to study the spontaneous or induced or locomotors activity in small animals like mice or rates. In this apparatus, we have used the optical sensors and emitters to record the horizontal movements of the animals on a six digit digital counter display.

 
Bicycle AlgometerCI -292
 

This bicycle frame is supported  by a wooden stand, from the front of  which  two uprights ascend  and carry a  desk and cross piece, which provide for the attachment, directly in front of the subject, of the tension balance and other pieces of apparatus.  A cast iron wheel of 5 ½ feet in circumference, weighing 22 kg  and mounted on balance.

 
Cooks Pole ClimbingCI -293
 

Outer made  of  thick plywood and inner animal chamber is made of clear acrylic sheet bottom of which is provided with chrome plated brass bars. A shock for controlled duration of 200V AC 50Hz single phase - 0.2ma is built-in and is controlled by built-in 11 position solid state timer up to 30 seconds. Output for connection to kymograph or recorder has been brought out as terminal. An animal dropping removal tray has been provided for keeping the equipment clean.

 
Double Cone BlenderCI -294
 

Consists of two S.S. Cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand drive is by means of an electric motor & reduction gear box through a center shift  the cone is mounted on Plummer blocks for easy movement thereby ensuring through mixing to facility easy movement of the cone while charging and discharging of the large units a special inching arrangement is provided with the unit motor used are single phase or three  phase.

 
Histamine ChamberCI -295
 

A compact Histamine Aerosol apparatus consisting of a clear Perspex exposition chamber divided in two sections an all glass nebulizer and dial type spygmometer for assay of anti-histamines drug on guinea-pigs etc.

 
Tincture PressCI -296
 

Extra heavy duty for making tinctures, decoctions infusions etc. cap. 1 Ltr, stainless steel disc, with screw driver, stainless steel mesh as inner perforated vessel with stop cock. 1 KG Capacity.

 
Tissue Processing Unit (Single)CI -297
 

With  sturdy  stainless  steel  basket, a rotor and 12 tissue containers complete with  thermostatically controlled wax bath and two one liter beaker.

 
Automatic Tissue ProcessorCI -298
 
With one stainless steel basket rotor, one stainless steel basket, 24 No. tissue capsules, 10  No.  one  liter beaker with cover, 2 thermostatically control wax baths, 4 No. calibrated time discs, one cutting pliers, dust cover and instruction manual. For processing of Tissue by Histopathological technique.
 
Automatic Tissue Processor Microprocessor BasedCI -299
 

All controlled / operated by feather touch key board with Digital Display. Programmer logic Controller for complete cycle . Technical Data:- The 12 stage timing sequence may be programmed for each stage for duration between 1 minute to 9 hrs. 59 minute, in steps of 1 minute.  Delay time can be programmed up to 99 hours and will be sequenced with main control.  Wax Bath PID temperature controller gives signal if temperature is not between 50º to 60ºC. Safety System will function at 10th, 11th, & 12th position and will stop the main unit in stage 9 onward till the set temperature is attained in the wax Bath. Slowly rotating 2 basket rotors are also operated through the microprocessor. The unit is supplied complete with 2 Nos. S.S. Basket Rotors, 2 Nos. S.S. Baskets, 24 Nos. S.S. Tissue Capsules, 10 Nos. S.S. beakers without lip, 2 Nos.   S.S.  Wax  Baths  (Special  designed  for  use  with PID temperature controller). Suitable to work on 220V, single  phase,  50Hz, AC  supply  Cap 1 liter.

 
 
 
HOME         |         ABOUT US         |         PRODUCTS         |         ENQUIRY         |         CONTACT US
     Copyright 2014 CHACHAN INDUSTRIES All rights reserved.